POWER STABILIZERS
Procurement Reference Number: PR9035518
Requirement:
The US Mission in Kampala invites responsible vendors to supply the items below.
01No Power Stabilizers
As EDIT ELEKTRONiK ESV-3F150 or equivalent.
- Power:150 kVA
- Power Factor: 0.8
- Input Voltage: 380 – 415 Volts Three phase
- Input Voltage Tolerance: -%10 / +%20
- Frequency: 50Hz ± 5%
- Input Connection: Screw Terminal
- Output Voltage: 380 volts
- SCR Module
- Voltage Tolerance: +/- 2.5%
- Frequency: 50 Hz ± 5%
- Current: 181A
- Overload Capability 101% – 125% 3 min., 126% – 150% 10 sec., 151% load 0.2 sec., after then output shut-off
- Response Time: 5-20 msec
- Correction Speed: 500 V/sec
- Efficiency: =/> 97% typical
- Input / Output Connection: Screw Terminal
- Input Voltage Protection: Stabilizer shut off electronically under / over voltage
- Output Voltage Protection: Stabilizer shut off electronically under / over voltage
- Input Current Protection MCB (optional)
- Output Current Protection MCB (optional)
- Output Overload Protection 101% – 125% 3 min., 126% – 150% 10 sec., %151 – %200 load 0.2 sec., above %200 immediately output shut-off
- Over Temperature Protection Stabilizer shut off for over – temperature
- Surge Arrester: Suitable surge arrester unit for lightning and high voltage (optional)
- Operating Temperature: -10 °C ~ +40 °C (optional)
- Humidity 90% none condensed
- Acoustic Noise < 45 dB
- Current: 181A per phase
03No Power Stabilizers
As EDIT ELEKTRONiK ESV-3F120
- POWER: 120 kVA
- Power Factor: 0.8
- Input Voltage: 380 – 415 Volts Three phase
- Voltage Tolerance: -%10 / +%20
- Frequency: 50Hz ± 5%
- Input Connection: Screw Terminal
- Output Voltage:380 volts
- SCR Module
- Voltage Tolerance: +/- 2.5%
- Frequency: 50 Hz ± 5%
- Current: 145A
- Overload Capability: 101% – 125% 3 min., 126% – 150% 10 sec., 151% load 0.2 sec., after then output shut-off
- Response Time: 5-20 msec
- Correction Speed: 500 V/sec (Optional full regulation up to 3 cycles)
- Efficiency: =/> 97% typical
- Input / Output Connection: Screw Terminal
- Input Voltage Protection: Stabilizer shut off electronically under / over voltage
- Output Voltage Protection: Stabilizer shut off electronically under / over voltage
- Input Current Protection MCB (optional)
- Output Current Protection MCB (optional)
- Output Overload Protection: 101% – 125% 3 min., 126% – 150% 10 sec., %151 – %200 load 0.2 sec., above %200 immediately output shut-off
- Over Temperature Protection: Stabilizer shut off for over – temperature
- Surge Arrester Suitable surge arrester unit for lightning and high voltage (optional)
- Operating Temperature -10 °C ~ +40 °C (optional)
- Humidity: 90% none condensed
- Acoustic Noise: < 45 dB
- Current: 145A per phase
Issued Date: February 27, 2020
Closing Date: March 13, 2020 at 10:00am, local time
Delivery point:
DDP American Embassy Kampala,
GSO Warehouse,
63/67 Spring Road, Bugolobi,
Kampala, Uganda.
Please submit your quotes to email KampalaBid@state.gov
Quotes MUST have detailed specification. Vendors are required to state the delivery period.
Failure to provide the above may result in disqualification.
Terms and Conditions
This RFQ incorporates by reference FAR 52.212-5 and 52.252-2, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://acquisition.gov/far/index.html
DOSAR clauses may be accessed at:
http://farsite.hill.af.mil/vfdosara.htm
Further Information
Email KampalaBid@state.gov
